[time-nuts] uCenter driver

[Mike Cook]

> Le 30 nov. 2014 à 22:53, Hal Murray <hmurray at megapathdsl.net> a écrit :
> 
> 
> michael.cook at sfr.fr said:
>> There has recently been comments on the COM port allocation in relation to
>> the LTE-Lite project which reminded me that I have seen an issue trying to
>> run multiple instances of the uCenter software in order to monitor/configure
>> multiple uBlox receivers at the same time. Unfortunately only one virtual
>> COM port is created located to the first instance. I cannot get multiple COM
>> ports allocated when plugging in another unit. Anyone seen this? ...
> 
> The LTE-Lite uses a vanilla FTDI serial to USB chip.  I use Linux and often 
> have more than one plugged into a system without any problems.
> 
> I'd be surprised if Windows has troubles with more than one.  (But I've been 
> surprised before.)
> 
> I don't know anything about the uCenter software.
> 
> Can you talk to both with your favorite terminal program?

Thanks for the hint. Yes I can converse with more than one at a time in Unix, but not Windows7 and if I remove the uBlox driver, they are not recognized at all. Mac Yosemite is a bit brighter, hitching them to the usbmodem driver. 

> 
> 
> 
> -- 
> These are my opinions.  I hate spam.
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.