[time-nuts] Frequency doubler 5/10 and distribution amplifier for Lucent KS-24361

Andy Bardagjy andy at bardagjy.com
Sun Apr 5 13:22:09 EDT 2015


It is possible to convert Altium files to Kicad 

https://github.com/thesourcerer8/altium2kicad/

This might also work, but Altium seems to be a work in progress

https://github.com/upverter/schematic-file-converter

Andy ◉ Bardagjy.com ◉ +1-404-964-1641

On Apr 5, 2015, at 8:08 AM, John Allen <john at pcsupportsolutions.com> wrote:

> Hi Time-Nuts - FWIW, the is a 30 day free trial of Altium Designer at
> http://www.altium.com/free-trial?gclid=CKnpkaux38QCFQotaQodoaYAWQ
> 
> The download requires a company name and email address.
> 
> I for one, would like at least one of each of Gerhard's boards.
> 
> Would anybody like to volunteer to create 10-20 boards and sell them?
> 
> If people are interested in boards, they can pm me at john at pcsupportsolutions.com
> And I will make a list and post it.
> 
> In your email, provide your name and email address and how many multiplier boards and how many low noise 220pV/sqrtHz preamp boards?
> 
> I have no time to do any more than that.
> 
> Is this worth being a TAPR project?
> 
> Trying to help, John K1AE
> john at pcsupportsolutions.com
> 
> -----Original Message-----
> From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Anthony Roby
> Sent: Saturday, April 04, 2015 10:12 PM
> To: ghf at hoffmann-hochfrequenz.de; Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] Frequency doubler 5/10 and distribution amplifier for Lucent KS-24361
> 
> Gerhard - I would like to make the board if you could make the layout available.  I don't have Altium, so would need the artwork to be able to toner transfer the board.  Is it available?
> 
> Thanks
> 
> -----Original Message-----
> From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Gerhard Hoffmann
> Sent: Saturday, April 04, 2015 7:19 AM
> To: time-nuts at febo.com
> Subject: Re: [time-nuts] Frequency doubler 5/10 and distribution amplifier for Lucent KS-24361
> 
> Am 03.04.2015 um 04:04 schrieb Philip Gladstone:
>> I'm coming late to this thread from January -- but did anybody ever 
>> make the PCBs for Gerhard's 10MHz output board? I'm interested.....
>> 
>> I just got my pair of RFTG's.
>> 
> Congratulations!
> 
> There isn't a lot of news.. The interest on the net quickly boiled down, my sample works and so there was not a great incentive to follow that with much energy. And getting boards out does not mean that those are really built or that there is any feedback at all, as I saw with my 220pV/sqrtHz preamp.
> 
> The Altium Designer files are available, maybe the regulators should be changed to sth. bigger (TO220 with small heat sink or so)
> 
> regards, Gerhard
> 
> (who will spend this rainy&cold Easter weekend on a 1pps generator whose outputs can be skewed in ps-steps to check the linearity of T2D converters or time stretchers.) _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.



More information about the time-nuts mailing list