[time-nuts] HP5065A upgrade kit H10
had at to-way.com
Tue Jun 16 11:32:49 EDT 2015
Very nice work Luciano, congratulations.
God, Guns, and Guts made America Great.
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of timeok at timeok.it
Sent: Tuesday, June 16, 2015 00:27
To: Discussion of precise time and frequency measurement; Discussion of precise time and frequency measurement
Subject: [time-nuts] HP5065A upgrade kit H10
I have developed an upgrade kit for the HP5065A.
This add one or two 10MHz outputs and can be installed in all the units have the HP10811 as OCXO.
The main features of this amplifier-separator are:
Very low residual phase noise, typical -150dB @ 1Hz High reverse isolation typical 110 dB High input impedance do not load the HP10811 output High output power handling on 50 Ohm settled to +15dBm (as the others HP5065A outputs) Output GND isolated to avoid the low frequency current loop
The Option H10-1 have one single 10MHz output The Option H10-2 have two separated 10MHz outputs
The option is assembled ready to install and is complete of all the connectors, cables and others components are needed.
You can find the installation manual with pictures here: http://www.timeok.it/files/hp5065AoptH10v101.pdf
Visit also my HP5065A corner here: http://www.timeok.it/HP5065_corner.html
If you are interested, please email me: timeok at timeok.it
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts  and follow
> the instructions there.
Message sent via Atmail Open - http://atmail.org/ _______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts