[time-nuts] Need advice for multilateration setup

[Bob Camp]

Hi

The point being that, to even get acceleration into the picture, you need have
impossibly high accelerations …

At 10 G, your oscillator needs to be temperature  stable to < 0.01C to even see
the acceleration. If you are climbing 100K feet during the acceleration phase the
oscillator will see a *lot* more than that.  

Bob

> On Mar 28, 2015, at 5:01 PM, Jim Lux <jimlux at earthlink.net> wrote:
> 
> On 3/28/15 10:27 AM, Bob Camp wrote:
>> Hi
>> 
> 
>> 
>> So If the rocket continuously accelerates  at 10,000 G’s, you will get a 20 ppm shift
>> with typical sensitivity.  If you do this for very long, you will also get into time dilation issues.
>> (you hit 0.1C in < 2 minutes).
> 
> 10,000G is more like an artillery shell.
> 
> A large amateur rocket might be more like 20-30G maximum.
> 
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.