[time-nuts] Acquired a Symmetricom 5817A-05Q / Power connector Question

[Magnus Danielson]

That is supposed to be an SMB connector, that is what I have on mine.

You can drop in a 0-ohm so that you can feed it and the antenna from 
Port 1. It might be a quicker solution for you.

Cheers,
Magnus

On 05/09/2015 02:27 PM, Bob Camp wrote:
> Hi
>
> Only going by the pictures, that looks like the remains of a broken SMB connector.
>
> Bob
>
>> On May 8, 2015, at 10:11 PM, M. George <m.matthew.george at gmail.com> wrote:
>>
>> I took delivery of a Symmetricom 5817A with the 05Q DC power option.  The 8
>> port seems to be going a little less than the 4 ports... not sure on the
>> reasoning there... however I picked it up on the usual auction site for
>> ~125.00 shipped.  I thought that was reasonable assuming it works.
>>
>> Anyway, I'm not too proud to admit that I'm not familiar with the power
>> connector that apparently comes with the 05Q option.  I have a link below
>> to a couple of pictures.   Maybe I missed something obvious when poking
>> around on the internet for documentation, but I can't find anything that
>> describes this connector.  I assume it is stock?  The +DC input pin/wire
>> can be seen just inside the white tube... again, maybe this is obvious to
>> real time-nuts!  I'm working on that time-nut thing!
>>
>> You can browse to the pictures here:
>>
>> http://www.nc7j.com/downloads/NG7M/Time-Nuts/5817A-05Q/
>>
>> Max NG7M
>> --
>> M. George
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>