[time-nuts] [Bulk] Re: Lucent/Symmetricom Z3810AS, KS24361 - They're Back

J. L. Trantham jltran at att.net
Thu May 21 18:56:46 EDT 2015


Dick,

Getting them working is easy.  Connect the supplied interface cable between the 'J5' connectors on each unit, supply an antenna connection to the TNC connector on the REF 1 unit, supply +24 VDC to pin 1 of P1 of both units, connect the 'return' to pin 2 of P1 of both units and stand back.

As Bob says, there is a long list of posts about these units including how to communicate with them.

The link on the listing is to a 'time-nuts' posting by Stewart Cobb and is very informative.

Good luck.

Joe

-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Richard Solomon
Sent: Thursday, May 21, 2015 3:36 PM
To: Discussion of precise time and frequency measurement
Subject: [Bulk] Re: [time-nuts] Lucent/Symmetricom Z3810AS, KS24361 - They're Back

Is there a discussion somewhere on these units and how to get them working ?

73, Dick, W1KSZ

On 5/20/2015 5:47 AM, J. L. Trantham wrote:
> Looks like another shipment for those that might have missed them before.
>
>   
>
> Item 221777430088
>
>   
>
> No connection to seller except satisfied customer.
>
>   
>
> Joe
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.



More information about the time-nuts mailing list