[time-nuts] Lea-6T Math error?

Azelio Boriani azelio.boriani at gmail.com
Fri Apr 15 06:15:58 EDT 2016


Did you use the CFG-TMODE svinVarLimit to set 350 and the svinMinDur
to set 32400?
The CFG-TMODE svinVarLimit is a variance in squared mm, not a standard
deviation...

On Fri, Apr 15, 2016 at 6:27 AM, Bob Stewart <bob at evoria.net> wrote:
> I hope I haven't posted about this before, but it's something that's bugged me for awhile.  When I run a survey-in on an LEA-6T, the CFG-TMODE2->fixedPosAcc value seems to be wrong.  For instance, I ran a survey today and told it to run for 32,400 seconds and reach at least 350mm accuracy.  When it finished, TIM-SVIM reported it had run 38,126 seconds with a mean 3D std deviation of 350mm.  OK, so far.  So, I go look in the CFG-TMODE2 structure and it reports 122mm.  That seems a bit odd, but OK.  And then I squared 350, and came up with 122500.  It appears that instead of just moving the 350mm value over to the TMODE structure, they've squared it and divided it by 1000.  I've noticed this happening on at least 2 versions of the 6T.  I suppose I should do the same test on the M8T.
>
> Bob
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.


More information about the time-nuts mailing list