[time-nuts] Lady Heather Version 5 is now available

[Jim Littlefield]

Version 5.00 is working well with my 58503A, but I did find one annoying behavior. If LH is the active application, as in it has keyboard focus, I find my screen saver will not activate.


Jim WN1X
On 12/11/2016 11:45:10 AM, paul swed <paulswedb at gmail.com> wrote:
Mark
I am trying to use Heather with a z3801. I have tried numbers of
combinations of what should set the system to the Z receiver. But none seem
to work. It immediately brings up the help screen and I assume that says
the command is bad.
I have no problem making the TBolt work.
Wonder if you could please clarify the receiver command.
Other bad note. My lucky day I have a LT1180 bad rcvr drvr chip in the
z3801.
Its receiving but not transmitting. Yahoo fun time.
Regards
Paul
WB8TSL

On Sat, Dec 10, 2016 at 7:25 PM, Mark Sims wrote:

> The heather.cfg file has a com port setting (/1u) and a /rxa (receiver
> auto-detect) command line option setting which gets processed before the
> settings on the command line.
>
> Try editing heather.cfg file and change the /1u command to /0
>
> ---------------------
>
> > I started it under Windows XP SP3, with the option /rxx as I currently
> have my TBolt
> connected to another PC, but what I got was an error message saying :
>
> Error exit 10002: Can't GetCommState()
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.