[time-nuts] Simple solution for disciplining OCXO with 1 PPS
Dimitri.p
dimitri at dotp.com
Sun May 22 16:30:49 EDT 2016
Among Simple , analog, 1PPS
you'll have to pick two of the three.
The miller GPSDO needs 10KHz it's simple and
analog. http://www.jrmiller.demon.co.uk/projects/ministd/frqstd0.htm
The IK0OTG is simple, uses 1PPS and is digital
http://www.ik0otg.net/index.php?option=com_content&view=article&id=53%3Aoscillatore-10mhz-sinc-gps&catid=34%3Ahome-made&Itemid=59&lang=en
At 10:41 AM 5/22/2016, Bernd Neubig wrote:
>Hello Fellow time-nuts,
>I am looking for a simple solution to discipline my 10 MHz reference
>OCXO in my private lab with an 1 PPS signal from a separate GPS receiver.
>I am curious if there is a solution possible without programming a
>microcontroller, as I am an old-fashioned "analogue" guy ;)
>I am well aware, that such a solution would have a lot of
>disadvantages, as it cannot effectively compensate for short-term
>variations. However I would be happy if such a KISS solution could
>achieve a stability (STS) of better 1E-10 over an hour. I know this
>is a damned long integration time for an analogue integrator...
>If that sounds too weird, I am open to receive advises for a
>microcontroller based solution.
>
>Thanks a lot for your comments to come.
>BTW: you need not to teach me about basics of short-term stability.
>I just want to evaluate the limits of a possible analogue solution.
>For sure, that's not real disciplining, but more like a long-tau
>integration PLL
>
>Best regards
>Bernd DK1AG
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.
More information about the time-nuts
mailing list