[time-nuts] China Oscillator Alternative

Adrian Godwin artgodwin at gmail.com
Thu Nov 10 17:50:38 EST 2016


I looked at this when it was mentioned here a few weeks ago. I did the
procedure in an hour or so and it's working well, keeping the PPS within
50ns of GPS with 6-8 satellites. Monitored by the patched version of Z38XX
at the moment though I look forward to putting Lady Heather on the job.

The curious thing is, although that file is hosted on eevblog, I can't find
any link to it from the forums. You have to know where to find it.

http://www.eevblog.com/forum/testgear/economical-option-for-precision-frequency-reference/?action=dlattach;attach=172662

Perhaps we could get a copy on Didier's site (with the author, Peter
Garde's permission) before it gets lost ?


On Thu, Nov 10, 2016 at 6:19 PM, Mark Sims <holrum at hotmail.com> wrote:

> Plus, you can add a Motrorla UT+ GPS receiver into the Z3812A and turn it
> into a GPSDO.   There is a nice writeup of the procedure on EEVBLOG.
> Basically you move a half dozen 0 ohm resistors and add a resistor for the
> antenna current sense circuit.
>
> Also, Lady Heather now talks to them.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>


More information about the time-nuts mailing list