[time-nuts] Thunderbolt Schematic

[Scott Stobbe]

If the unit is low on amplitude, there isn't likely much more than a buffer
amp between the ocxo and 10 MHz output.

On Tue, Nov 29, 2016 at 7:54 PM Bob Camp <kb8tq at n1k.org> wrote:

> Hi
>
> There is no schematic for the TBolt available. Based on Trimble’s approach
> to keeping
> all their IP private (look at the survey side …), there will not be a
> schematic coming out
> from them. Since a good chunk of the functionality is in the FPGA’s and
> CPU’s, a schematic
> may be a tough thing to come up with by tracing this and that on the board.
>
> Bob
>
> > On Nov 29, 2016, at 6:38 PM, Richard W. Solomon <w1ksz at earthlink.net>
> wrote:
> >
> > From the last e-mail I saw in 2014, there was no schematic available.
> >
> >
> >
> > Has anything changed lately, is one available ?
> >
> >
> >
> > I have one with low output that I would like to take a crack at fixing.
> >
> >
> >
> > Thanks, Dick, W1KSZ
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>