[time-nuts] Simple open source microcontroller solution to tune DDS needed

[Clint Jay]

I think maybe you might have meant the AD9835 ?

Anyway, there are plenty of code examples out there, do you have a
processor in mind or are you free to use whatever is suggested?



On 13 Dec 2017 20:03, "Richard (Rick) Karlquist" <richard at karlquist.com>
wrote:

> I need a very simple controller to tune a DDS with up/down
> switches (imagine setting the time on a clock).  A DDS
> chip, such as an AD9836 would go on a PC board and a couple
> of pushbuttons would tell the controller to tune up or
> down.
>
> Before reinventing this wheel, I thought I would see if
> anyone knows of a similar solution that can be leveraged.
> What I would like is both hardware and software, where
> the software could be edited to accommodate the up/down
> buttons.  A last resort would be to write software from
> scratch.  My software skills are extremely limited.
> Cutting and pasting code might work for me.
>
> I need to be able to embed this onto an existing PC board.
> I can't use a preexisting "daughter" card, other than
> to copy the design of the card.
>
> Rick Karlquist
> N6RK
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/m
> ailman/listinfo/time-nuts
> and follow the instructions there.
>