[time-nuts] What to do with a 5061A/5061B with dead NiCds

[Alex Pummer]

it is a "ventilated flooded" battery?

73

if it s a flooded battery it is very easy to fix it


On 2/5/2017 3:27 PM, Skip Withrow wrote:
> Hello time-nuts,
>
> I have 5061A and 5061B units with the battery option and dead battery
> packs.  My question is what makes the most sense when refurbing these units?
>
> 1.  Yank the old battery out and just leave it that way.  Running the unit
> on a UPS would preserve the functionality.
>
> 2. Replace the pack with a rebuilt NiCd pack.  I'm sure Batteries Plus
> would be happy to do it, but sounds expensive.
>
> 3. Replace the pack with a NiMH pack, and really crank down the float
> current of the 5061.
>
> 4. Replace the pack with Li-ion battery.  Would be a much smaller battery,
> but the charging circuit would have to be pitched.  Building in a Li-ion
> charge controller sounds like it could be a project (which I don't
> necessarily want).
>
> 5. Yank the old battery pack and run the 5061 on two 12V batteries with an
> appropriate power supply/charger (basically a version of #1).
>
> Any thoughts on these or other options would be appreciated.  Thanks in
> advance.
>
> Regards,
> Skip Withrow
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2016.0.7998 / Virus Database: 4756/13896 - Release Date: 02/05/17