[time-nuts] KS24019 units PSU requirements

[David C. Partridge]

Thanks, I ordered a 24V 120W power brick from eBay.

Dave

-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Mark Sims
Sent: 21 June 2017 16:19
To: time-nuts at febo.com
Subject: [time-nuts] KS24019 units PSU requirements

I have not measured mine,  but I saw a spec of 2A max for each side mentioned somewhere (would drop considerably after warmup).  I am using a 24V 100W supply that came with my Z3811/Z3812 Lucent boxes.  It was already wired up with the proper connectors for the boxes.

------------------

> I  have a pair of L108 (RFTGm-II-Rb) and L109 (RFTGM-II-XO). 
What current do these bad boys draw so I don't get too skinny a 24V PSU?
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.