[time-nuts] Furuno GT-8031 breakout board

Gregory Maxwell gmaxwell at gmail.com
Thu Feb 15 18:46:25 EST 2018


Hi Bob,

If you do a group buy of GT-8736 I'm game for 10.

On Thu, Feb 15, 2018 at 6:55 PM, Bob Darlington <rdarlington at gmail.com> wrote:
> I bought some of the Furuno GT-8736 boards for $35 a pop, qty 1 (or 2 as
> was the case).  And was quoted at $26.91 a pop if I buy 100.   If there's
> interest, I'm happy to coordinate a group buy at cost.  Just paid off that
> credit card yesterday so why not?   If there are more desirable boards from
> Furuno, let me know and I'll see what I can do.
>
> -Bob
>
> On Thu, Feb 15, 2018 at 3:59 AM, ew via time-nuts <time-nuts at febo.com>
> wrote:
>
>> Talking about Furuno has any one looked at the GT-87. I have known about
>> it for years but found no way to buy some now DigiKey has them for $ 100,
>> Buerklin in Germany for half that price. Saw tooth is +- 1.7 nsec we are
>> not going to bother with correction. We are in the process to lay out a
>> board any recommendations are appreciated
>> Bert Kehren
>>
>> In a message dated 2/15/2018 12:39:48 AM Eastern Standard Time,
>> holrum at hotmail.com writes:
>>
>>
>>  I just did a small adapter board that converts the 2x5 pin 2mm header on
>> the Furuno GT-8031 to a 1x9 pin 0.1" connector with the pinouts of the
>> Adafruit Ultimate GPS. There a couple of minor pin differences... the
>> Adafruit FIX pin is not used and the Adafriuit 3.3VREG output pin is used
>> as the Furuno antenna power connection. The Furuno can be soldered to the
>> board or a female connector could be installed.
>>
>> I'm getting ready to order a few boards. If interested, contact me off
>> list._______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/
>> mailman/listinfo/time-nuts
>> and follow the instructions there.
>>   1 Attached Images
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/
>> mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.


More information about the time-nuts mailing list