[time-nuts] FRK

[ewkehren]

PaulI have never seen a FRK or M 100 that did not have a screw iin lamp but Attila`s unit looks like nothing I have seen before,  I am not a Corby but over time 20 units have passed through my hands      
Bert


Sent from my Galaxy Tab® A
-------- Original message --------From: paul swed <paulswedb at gmail.com> Date: 2/27/18  1:45 PM  (GMT-05:00) To: Discussion of precise time and frequency measurement <time-nuts at febo.com> Subject: Re: [time-nuts] FRK 
Bert what I assume is the FRK lamp. it has a few wires and then 2 pins out
of the side.
Unless those are for mounting the lamp.
Regards
Paul
WB8TSL

On Tue, Feb 27, 2018 at 11:21 AM, Attila Kinali <attila at kinali.ch> wrote:

> On Tue, 27 Feb 2018 09:01:31 -0500
> Bob kb8tq <kb8tq at n1k.org> wrote:
>
> > Judging from the date codes on some of the parts, I’d guess that
> > your FRL-L is from 1982. I’m only looking at a few parts that came
> > through well enough in the picture to read (and that have what look
> > like rational date codes …).
>
> Sorry, I didn't take much care when taking the pictures.
> I can do better ones later.
>
> But yes, the board has definitely an 80s vibe. The whole construction
> is different then what I am used to from 80s electronics, though.
> But I guess that's because it was designed and manufactured for
> hi-rel applications.
>
>                         Attila Kinali
>
> --
> It is upon moral qualities that a society is ultimately founded. All
> the prosperity and technological sophistication in the world is of no
> use without that foundation.
>                  -- Miss Matheson, The Diamond Age, Neil Stephenson
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.