[time-nuts] L1 GPS timing signal(s) into local time on computer(s)

Sarah White kuzetsa at gmail.com
Sun Aug 19 14:41:39 UTC 2012


>From what I've read, most GPS modules which output PPS, the NMEA
sentence has the timestamp of the next, upcoming pulse. Regardless of
how the NMEA or other time data is, the PPS itself is only a guarantee
"this is the boundary for a second" and NTP documentation typically
recommends a second reference clock to "number the seconds" anyway.


Thanks everyone. I got many responses which confirm my initial
conclusions. I had trouble locating a GPS thunderbolt on ebay because
there is an HTC phone with "thunderbolt" in the name. (I got a few hits
for the GPS module, but there is no way to filter out "phones" or I
might just be bad at operating ebay)

uhm... yeah. As someone pointed out. It is a total nightmare to figure
out which direction my GPS time is wandering, and finding the correct
offset. I'm just gonna give up on this USB module, and get a real one
with PPS

Also, I really hate google's new "shopping" experience. They started
listing less content, and now push content from stores which charge 2-3
times as much.

As far as existing hardware goes, I don't have any slots free in my
desktop for a serial board...

Despite the new "google shopping" headache, I was able to determine that
many "older" computers from the windows XP era which still have serial
ports, and are available refurbished from walmart of all the crazy
places. (most of the time, better price than the ones being pushed by
google shopping, and even have XP installed and a 1 year warranty)

So no problem. I can source a suitable machine to run NTP, and for less
than $200, guaranteed.

Will probably be using gentoo linux, as the default configuration does
NOT expect you to run any specific kernel. I can easily recompile
anything I need without breaking unusual, unforeseen dependencies.
(doesn't hurt that I've been using gentoo since the stage1 install was
preferred, all the way back to the GCC 2.x era)

I'm really aiming to run a server which ONLY runs NTP, and at most 1 or
two other daemons (light duty on those)

Thanks so much everyone.

On 8/19/2012 7:11 AM, Ken Duffill wrote:
> Just one further question.
> When the pps input triggers, so my linux box knows a second has just
> ticked; is the time of that second the one the NMEA sentence has just
> sent, or will send next?
> Or to put it another way, when I receive an NMEA sentence is this the
> current time (as was when the sentence was constructed) or the time at
> the next PPS 'tick'?
> Thanks in advance.
> KenD
> On 19/08/12 11:23, Bill Dailey wrote:
>> I will jump in a bit.  I, and many have been right where you are.  You
>> are correct...USB is a no go for accurate time.  Same on windows.  So
>> you need a Linux box with serial port.  Anything from a Beaglebone,
>> pandabox...or pc will work.  You certainly need a gps with a pulse per
>> second output (most have) and you can wire that up to the appropriate
>> line on the serial cable or send to the target computer via gpio pin. 
>> The pps thing is fairly simple really.   If you are receiving gps data
>> via serial connection it takes a variable amount of time to get each
>> status report from the gps...list time etc etc in text format and
>> sends it repeatedly.  This gets ntp to within a second or some
>> fraction thereof...the pps part refines that..no text or anything...
>> Just a one pulse per second separate from the gps info that acts as a
>> exclamation point to tell ntp "right here is the actual start of the
>> second!" alone the pps wouldn't be useful for time but with the time
>> info ntp already has from the nmea sentences it is priceless for
>> really precise time.   That's about it.  Once you have gps and pps
>> configured on Linux you should be in the sub 5 microsecond range.  It
>> gets tricky getting better than that and you have to Ntpns and really
>> worry about hardware issues that affect precision (system clock
>> stability etc) but it can be done.
>> Doc
>> KX0O
>> Sent from my iPad
>> On Aug 18, 2012, at 11:25 PM, Sarah White <kuzetsa at gmail.com> wrote:
>>> Hi, this is my first post.
>>> First off. Windows 7 USB connection to the GPS (no serial ports / modern
>>> computer) and I'm pretty sure that is my main problem.
>>> Past few months, I've been trying to figure out my timing issues. Lots
>>> of reading & trying to figure out how to best configure everything. I'm
>>> typically still off (randomly) by 20-100 miliseconds. I'd like to at
>>> least get to within 50 microseconds (nanoseconds would be wonderful)
>>> 1) I need a computer with a serial port. The curent GPS module I'm using
>>> is INTERNALLY RS232 --> USB converter, and recognized by my windows 7
>>> computer as: "Prolific USB-to-Serial Comm Port (COM3)" ... the latency
>>> and jitter is horrible, and both are seemingly random.
>>> 2) I need to run my stratum 1 clock (connected to the stratum 0 time
>>> source via old-school RS232 serial) on linux or a form of BSD with
>>> support for kernel timestamps, and a version of NTP with a driver to
>>> supports my reference clock... points 1 and 2 seem fine.
>>> 3) I'm clueless about mounting an antenna, running cable, grounding /
>>> lightning protection, etc... Really want an easy to install one.
>>> For software, I've used 4.2.6 (stable / production) as well as 4.2.7
>>> (dev version) NTP and haven't been able to tell any difference.
>>> Just using the generic NMEA driver / this is a no-name cheapo SIRF
>>> module.
>>> Also, trying to wrap my head around these:
>>> http://linuxpps.org/wiki/index.php/LinuxPPS_installation
>>> http://linuxpps.org/wiki/index.php/LinuxPPS_NTPD_support
>>> And here is where I give up. As the subject line suggests:
>>> HELP!!! I'd like to convert L1 GPS timing signal(s) into local time on
>>> computer(s)
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the Time-nuts_lists.febo.com mailing list