[time-nuts] Modern motherboard with RS232 port

Tom Miller tmiller at skylinenet.net
Sun Aug 19 19:52:31 UTC 2012

No it is not.

VA * PF = W for VA = volt amps, PF = power factor, W = watts (or true power)

PF = the cos of the phase angle between the current and the voltage 
(assuming both are sine waves)


Peak Volts * 0.707 = RMS volts, again for sine waves only.


----- Original Message ----- 
From: "Christopher Brown" <cbrown at woods.net>
To: <time-nuts at febo.com>
Sent: Sunday, August 19, 2012 3:38 PM
Subject: Re: [time-nuts] Modern motherboard with RS232 port

Converting VA to W is same as converting peak V to RMS V.

More information about the Time-nuts_lists.febo.com mailing list