[time-nuts] M12+T module questions

Ernie Peres ernieperes at aol.com
Sat Apr 5 11:10:00 UTC 2014


Hi Jim,

here is the type....Sanyo ML621 ML 621 Rechargeable 3V cmos Backup BatteryNEW! 

available on ebay......

best regards,

Ernie. HG5ED.




-----Original Message-----
From: Jim Miller <jim at jtmiller.com>
To: time-nuts <time-nuts at febo.com>
Sent: Sat, Apr 5, 2014 1:04 pm
Subject: Re: [time-nuts] M12+T module questions


 Jim/Chris
Thanks for the connector/cable info.
Regarding the battery:
> I used a 2032 coin cell battery and holder I un-soldered from an dead PC
otherboard.
 Even a coin cell will last its shelf life at least.
According to the manual the module is designed for a rechargeable type
hile the lithium coin cells I'm aware of (e.g. 2032) are primary and not
echargeable. There is already a battery holder there which is perhaps 6mm
n diameter. There is a tiny marking next to it "UV-R1" or "UV-M1".
I'm aware of the need to shift the levels from the PC. Thanks for the
eminder however.
73
jim ab3cv
______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.




More information about the Time-nuts_lists.febo.com mailing list