[time-nuts] optically excite a quartz crystal?

Bob Camp lists at rtty.us
Mon Apr 21 14:08:13 UTC 2014


If you are going to thermally excite the resonator, and measure the resonance optically, there’s no reason at all to use quartz. There are other materials with much higher acoustic Q than quartz.


On Apr 21, 2014, at 9:47 AM, Magnus Danielson <magnus at rubidium.dyndns.org> wrote:

> On 04/21/2014 03:18 PM, Attila Kinali wrote:
>> On Mon, 21 Apr 2014 14:54:12 +0200
>> Magnus Danielson <magnus at rubidium.dyndns.org> wrote:
>>>> They used a 10mW HeNe laser, modulated with 1kHz to 1MHz on
>>>> various quartz cuts (X+5°, DT, AT) and could measure oscillations
>>>> of the quartz using metal electrodes.
>>>> The mechanism of exitation was photothermal
>>> 10 mW laser is reasonable.
>>> What levels of signal where they getting?
>> 6.2mV, with an real laser incident power of 5mW (the AOM "ate" half of the power)
> Cool. Today we use semiconductor lasers that we can modulate directly, so no need for the AOM on the NeHe laser.
> Cheers,
> Magnus
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the Time-nuts_lists.febo.com mailing list