[time-nuts] fast switching quiet synthesizer
jimlux at earthlink.net
Tue Oct 7 23:36:42 UTC 2014
On 10/7/14, 10:32 AM, Magnus Danielson wrote:
> You should be able to use DDS test-boards and by timing your last write,
> you should be able to time the frequency jump.
> The STEL-1173 takes 6 bytes, but writing the last one latches all 6
> bytes over to a single 48 bit word. I expect that other DDSes have the
> same distinct transfer-phase if you only look in the datasheet for the
Yes, virtually all of them have a "load" input of some form (I'm
familiar with the AD98xx and AD99xx ones, and they certainly do).
What I'd really like, though is something at a slightly higher level of
integration (for which I am willing to pay.. it's a time vs money
thing). Does someone sell a DDS in a box with connectors, etc.
I need a tuning range, for now, of around 3.1 to 3.4 GHz, so any of the
"1 GHz" DDSes can generate something that I could mix up with a 2.8-3
GHz LO (which I have), although I'd have to be careful about images.
Or I can run the few hundred MHz out of the DDS into a doubler/tripler,
then mix up.
> Some of the modern DDSes can take 10 MHz directly and step it up
> internally before hitting the DDS core, but it may be that you need to
> synthesize a higher clock from the 10 MHz first.
Not a problem, I think I have a 10 in to 100 MHz out set of bricks from
Wenzel (x5 and x2) from a previous project
More information about the Time-nuts_lists.febo.com