[time-nuts] WTB: GPS Antenna Splitter
peterl at standingwave.org
Wed Oct 15 22:55:54 UTC 2014
Dave, I think I have a MiniCircuits ZAPD-3(?) splitter or two kicking
around. I'll try to get a look in the stash this weekend.
On 2014-10-06 13:01, Dave M wrote:
> Does anyone in the group have, or can point me to, a low-cost (but not
> cheap) 2-port splitter for a GPS antenna? Those on Ebay are rather
> I have two GPSDO units, and have both an older timing antenna and a new
> choke ring antenna (Thanks, Pete L). I already have one 2-port
> (working well), but my intent is to connect both antennas through the
> splitters and a couple coaxial relays so that I can, with the twist of
> switch, allow me to run each GPS from a different antenna, or both from
> same antenna. I would like to gather some data as to the differences
> between the two antennas. I know I could switch the connections
> but I like the idea of a switch to sort of automate the connections,
> and I'd
> need another splitter anyway.
> Before I go to the trouble and expense of building upon this idea, are
> any comments as to the value of the project?
> Some questions come to mind:
> I'm thinking about mounting both antennas on the same mast, at the same
> elevation, just separated by a couple feet. Any problems that I should
> aware of by putting both antennas so close together? Will that small
> distance have a noticeable effect when switching a receiver from one
> to the other? Will the GPS notice the difference and want to do
> Thanks for your comments.
> Dave M
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com