[time-nuts] LTE-Lite module and the pendulum...
djl at montana.com
Tue Oct 21 19:08:36 UTC 2014
Also have this problem with capacitor-adjusted tuning. No matterhow careful
you turn, stiction causes the adjustment to jump in the direction of the turn.
>> Great insight thanks. You nailed it: out with the old oscillator and in with
>> that doesn't have that problem.
>> Btw the mechanical tuning issue you mentioned is essentially the same exact
>> problem: even the slightest turn will make the frequency jump too high or
>> low. It can drive you (and the loop) crazy trying to get it on-frequency.
> Whenever I've seen this behavior, it has always been caused by uncertainty or
> "quantization" on the part of the trimpot's wiper, rather than anything that
> could be blamed on the varactor. What would be a good example of a TCXO or
> OCXO model that exhibits EFC hysteresis? I don't immediately understand what
> could cause this phenomenon, and I'd like to reproduce it here to see what's
> -- john, KE5FX
> Miles Design LLC
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
"The power of accurate observation is commonly called cynicism by those who
have not got it."
-George Bernard Shaw
Dr. Don Latham AJ7LL
Six Mile Systems LLC
17850 Six Mile Road
Huson, MT, 59846
mail: POBox 404
Frenchtown MT 59834-0404
More information about the Time-nuts_lists.febo.com