[time-nuts] float chargers for oscillator backup power
brooke at pacific.net
Sun Oct 26 18:13:54 UTC 2014
The Gibbs 5 Mhz frequency standard used a two step power supply system.
It uses a couple of series connected UA723 based power supplies. One to drop the AC line to 20 VDC to float charge 3
series connected 6 Volt (18 V total) lead acid batteries and the other to supply the double oven quartz oscillator that
used a Bailey glass bottle rock. It's my understanding that this is a very quiet power supply.
It's fatal flaw was that the lead acid batteries were in the same rack mount box as the electronics and acid fumes
etched the traces off the circuit that was inside the oven.
Jim Lux wrote:
> There are a variety of inexpensive wall-wart packaged float chargers for lead acid batteries around. Might be easier
> to just get something off the shelf.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com