[time-nuts] 10MHz Rubidium reference source for frequency counter
michael.cook at sfr.fr
Wed Oct 29 18:03:05 UTC 2014
Le 29 oct. 2014 à 08:32, Karen Tadevosyan a écrit :
> Thanks again for your explanations and advices.
> I raised this question as a ADEV measurement result of my GPSDO/NEO-7M is about 1E-9 for tau = 1sec http://www.ra3apw.ru/wp-content/uploads/2014/10/NEO7M_OCXO_MV89A_10M_2h0_ADEV.jpg and it isn't meet my expectation.
> In my understanding (before I published my question here) the reason for this is not a good enough short range stability of my frequency counter's reference OCXO that's why I had an idea to use external rubidium source.
> Now I see that even my internal reference OCXO provides a good ADEV value 1E-10 for tau =1 sec (according Pendulum CNT-91 with opt.19 datasheet).
> If so what can be a reason of not a good ADEV result of GPSDO/NEO-7M?
Without GPS steering, the oscillator that you have should be able to give you low 10^12 stability at tau 1s once it has been running for a few days. Have you measured it to see if it is reasonably stable when free running?, at least with a consistent drift. If it is not then GPS won't help. If it is a good rock , then try using a pot vary the frequency. If it won't steer then there maybe something wrong in the box, or if the osc is old, maybe you have hit the min/max adjustment limits. Have you monitored your EFC corrections? You may have a too short time constant or too course adjustments causing overshoots.
> Karen, ra3apw
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com