[time-nuts] 10MHz Rubidium reference source for frequency counter
ra3apw at mail.ru
Fri Oct 31 19:57:51 UTC 2014
Thanks All for your comments and clarifications.
The next OCXOs have been tested today:
* Morion MV89A 10.000MHz #1
* Morion MV89A 10.000MHz #2
* Morion MV89A 10.000MHz #3
* Isotemp 131-191 10.000MHz #1
* Pilot C3Z 10.000MHz
* Bliley NV26R891 100.000MHz
* Giacint-M 5.000MHz
Measurement set up:
* Pendulum CNT-91 with TimeBase opt.19 and 10
* Prologix GPIB-USB
* TimeLab V1.2 (x64)
* Windows7 Pro (x64)
* PC i5 /3.4GHz / 16GB
ADEV results https://dl.dropboxusercontent.com/u/21338179/hamradio/OCXO_Adev/ocxos_adev_test_20141031.jpg
TimeLab configuration https://dl.dropboxusercontent.com/u/21338179/hamradio/OCXO_Adev/timelab_adev_config.jpg
All OCXO's TimeLab TIM files can be download https://dl.dropboxusercontent.com/u/21338179/Hamradio/OCXO_Adev/OCXO_Adev.zip
> A good MV89A can be below 1E-12.
As you can see ADEV of all my tested OCXOs are not better than 4E(-10) for tau =1s.
Question: can I be more or less happy with this result or something wrong in my measurement?
> Date: Thu, 30 Oct 2014 23:32:48 +0100
> From: Adrian <rfnuts at arcor.de>
> as by the datasheet, the time interval resolution of your counter is 50 ps.
> This translates into an ADEV value of 5E-11 at tau = 1 sec, 5E-12 at
> tau = 10 sec etc, and represents the theoretical measurement limit of the counter.
> It can be measured by feeding the same signal into both inputs (start
> stop) at the same time. A short delay (additional length of coaxial
> cable) at the stop input keeps the counter from producing phase wraps
> (jumping between a full input signal period and zero).
> A good MV89A can be below 1E-12. For measuring two good MV89A's
> against each other, a TI resolution of 50 ps is insufficient because
> up to 100 sec, to the most part of it, the actual ADEV of the
> oscillators can be below the measurement limit of the counter.
More information about the Time-nuts_lists.febo.com