[time-nuts] TymServe 2100 OCXO (MTI 240-0530-D)
gerhard at wittreich.org
Wed Jun 3 14:14:13 UTC 2015
I'm giving the entire rebuild a try including the Ace Trimble III clone
form Heol Design. I'm not sure it is practical but I like the idea of
keeping an old unit running. I read the post you mentioned which does a
nice job of discussing the firmware settings. I was hoping for some
practical tips on removing and reinstalling the oscillators. Is it a
straight forward desolder/resolder? Is there an insulating pad (thermal or
electrical) under the OCXO? Any pitfalls?
Gerhard R Wittreich, P.E.
On Tue, Jun 2, 2015 at 10:41 PM, Robert Watzlavick <rocket at watzlavick.com>
> See the thread titled "Upgrading TS2100 from TCXO to OCXO" around
> 3/30/2011. I used a different OCXO but one that had a compatible EFC range.
> It's funny, a few weeks ago before the TS2100s started acting up, I would
> have picked up one of those OCXOs in a heartbeat. I've had an eBay watch
> set up for years waiting for that part. But now I'm not so sure I want it
> On 06/02/2015 08:32 AM, Gerhard Wittreich wrote:
>> I just discovered that a correct model MTI OCXO (MTI 240-0530-D) for the
>> TS-2100 is currently available on eBay. In the past MTI 240's of
>> versions have been available but unsuitable for the TS-2100. Price is
>> $45.99 + shipping. I have one on the way.
>> NEW Symmertricom BC11736-1000 MRI 240-0530-D 010285-0530-D Crystal
>> Now, has anyone replaced a stock oscillator with the correct MTI 240 in a
>> TS-2100? Glad to take this off-line of the topic is not of general
>> Gerhard R. Wittreich, P.E.
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com