[time-nuts] hp 5061b replacement tube
pete at petelancashire.com
Sat Jun 13 13:53:05 UTC 2015
Define 'needs a tube"
Paul Swed and I have 5061's and both are way past what most would consider
needing a new tube.
Search the archives on what we have done. I power mine up every 4 months
and let it run for a few hours to a day. And
once or twice a year. Last year mine has run for a couple weeks while using
to do some experimenting.
On Fri, Jun 12, 2015 at 10:03 PM, lincoln <lincoln at ampmonkeys.com> wrote:
> I'm guessing I all ready know the answer to this but:
> A friend gave me a hp 5061b but in need a tube. Symmetricom was listing
> the price of a replacement at 35k before the go bought out by Microsemi.
> Given Microsemi has a tendency to rebrand equipment and then charge 4x the
> price, an official tube is likely a way non starter. Friend seemed to think
> there were "other" sources for tubes, but I am rather pessimistic.
> What do you think? Is this thing junk? I would hate to scrap it.
> Maybe use it to house a GPSDO.
> On Jun 12, 2015, at 6:55 AM, Cube Central <cubecentral at gmail.com> wrote:
> > Hi Max! Thanks for the information, I was wondering if you had
> documented what you did to your Raspberry Pi so that it might be
> reproducible to someone like me (a newcomer time-nut and intermediate Linux
> user) ... you had said:
> >>> "Here is what I have been able to do with a Motorola Oncore UT+ that I
> got from Bob Stewart awhile back. This is with a Raspberry PI 2 with a
> number of tweaks and a custom compiled kernel. Nothing too drastic... plus
> the current Dev version of NTP compile on the Raspberry PI."
> > What tweaks? What options have you compiled? What are the gritty
> details of your setup?
> >>> "I'm getting better results letting ntpd discipline the clock over
> doing kernel discipline...
> > not surprising because the algorithms in the ntpd code are much more
> sophisticated than the Linux kernel pps code... ntpd discipline provides
> much lower jitter in my experience."
> > what setting is this and how might I go about experimenting with it? Is
> that the "flag3" option in the "Generic NMEA GPS Receiver" documented
> here? https://www.eecis.udel.edu/~mills/ntp/html/drivers/driver20.html
> > <snip>
> >>> "Not too shabby for a killer deal on an Oncore UT+ for $5 from Bob!
> I'm running the PPS out of the UT+ through a level converter to get the
> ~3.3v PPS output... the serial output on the UT+ is also going through a
> level converter direct into the Pi 2. Using the oncore 127.127.30.0 ntpd
> driver and again, i'm not using hardpps kernel discipline."
> > I see word HARDPPS in the driver you mentioned (
> https://www.eecis.udel.edu/~mills/ntp/html/drivers/driver30.html ) but
> that documentation is a bit scarce... Could you fill me in on how you have
> it set up? Is the PPSAPI also used for the "Generic NMEA GPS Receiver"
> (driver 20) or the PPS driver (driver 22)?
> > Thanks so much for your assistance! Sorry if these questions have been
> posted before, but I am very curious about your setup as it nearly matches
> > -Randal "r3" of CubeCentral
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com