[time-nuts] Generating a solid PPS from 10Mhz source

Ole Petter Ronningen opronningen at gmail.com
Wed Jan 13 13:31:25 UTC 2016

Sounds like a PICDIV is just about right:


On Wed, Jan 13, 2016 at 10:22 AM, Jerome Blaha <jblaha at polariswireless.com>

> Hey Guys,
> Is there an easy circuit to build that can consistently deliver a 1 PPS
> from a 10MHz source with excellent resolution and repeatability?  My first
> application is to test different 10MHz oscillators without a TIC always
> attached and then compare the PPS output change over time against a master
> GPSDO PPS with an HP53132A.
> The circuit used for PPS generation would have to deliver consistent PPS
> output with preferably not more than 100ps noise or jitter, assuming a
> perfect source.  I'm totally guessing that for this resolution, the PPS
> would have to be generated and accurate to within 0.001Hz every second.  If
> this is too difficult, maybe the integration time can be increased to
> generate one pulse every 10second or every 100,000,000.00 cycles?
> Finally, is a square 10Mhz reference any better in this case than a
> sinusoidal input for generating the PPS?
> Thanks,
> Jerome
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the Time-nuts_lists.febo.com mailing list