[time-nuts] S200 to S250 Conversion to in/outs

martinm at soundtech-lg.com martinm at soundtech-lg.com
Wed Oct 4 16:01:33 UTC 2017


Hi Philip,

S200/S250 share the same F/W and OS files on the CF Card (V1.30
currently). The out 1PPS, and 10mHz are there now, and it is my
understanding that although the unit always defaults to GPS, it also
constantly checks for any usable, valid sync signals from any source...
including those 1PPS, 10mHz, and IRIG inputs, so pretty sure it's
already good to go. Could always be wrong of course :) Will update as I
get the jacks in, and tested.

Martin






Re: [time-nuts] S200 to S250 Conversion to in/outsPhilip JacksonWed, 04
Oct 2017 07:01:54 -0700

Have you tested this approach?The firmware will need to recognize the
new hardware configuration to enablethe 250's additional sync input
options and I'm not sure how just addingjacks would be something that
could be sensed reliably by the chipset?ThanksPhilip-----Original
Message-----From: time-nuts [mailto:time-nuts-boun... at febo.com] On
Behalf Ofmart... at soundtech-lg.comSent: Tuesday, October 03, 2017 4:25
PMTo: time-nuts at febo.comSubject: [time-nuts] S200 to S250 Conversion to
in/outsQuite easy to accomplish!Signals 1PPS and 10mHz are sitting
untapped at the jack signal traces onthe board.You could put any 50 ohm
BNC jacks there. However here is the correctdual jack part to install (3
req'd).Search Digikey for their part# ARF2115-NDVoila! Instant S250 !!!
all the gozintas, and gozoutas.Hope this has not already been
discussed!Martin_______________________________________________time-nuts
mailing list -- time-nuts at febo.comTo unsubscribe, go
tohttps://www.febo.com/cgi-bin/mailman/listinfo/time-nutsand follow the
instructions
there._______________________________________________time-nuts mailing
list -- time-nuts at febo.comTo unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nutsand follow the
instructions there.
Previous messageView by threadView by dateNext message



[time-nuts] S200 to S250 Conversion to in/outs martinm
+ Re: [time-nuts] S200 to S250 Conversion to in/outs Philip Jackson




 Reply via email to


The Mail Archive hometime-nuts - all messagestime-nuts - about the
listExpandPrevious messageNext message



More information about the Time-nuts_lists.febo.com mailing list