[time-nuts] PRS10 PRBB Shematics

Li Ang 379998 at qq.com
Mon Oct 9 12:39:46 UTC 2017

Hi Guys
   I have just bought 2 kinds of PRS10 connectors on taobao.com. (PCB type and cable type, refer to the attached photo). It is about 8$ each(the D-SUB + center RF part). If you are looking for it, I can send you the link off the list. 


Li Ang / BI7LNQ

------------------ Original ------------------
From:  "Jacques Tiete";<jacques at tiete.org>;
Date:  Mon, Oct 9, 2017 11:37 AM
To:  "TimeNuts"<time-nuts at febo.com>;

Subject:  Re: [time-nuts] PRS10 PRBB Shematics

Thanks for the prompt reactions, in the mean time I understood Cannon connectors can be a real pain in the xxx :-) to figure out the right one. 


Op 6 okt. 2017, om 23:19 heeft Jacques Tiete <jacques at tiete.org> het volgende geschreven:

Fellow timenuts,

I’d like to find some more info about the SRS “PRBB” breakout board for the PRS10, schematic diagram, parts list (eg. the cannon pcb connector used) and all relevant info.
An internet/timenuts research did not turn up anything relevant.

thanks & 73’s,


Jacques Tiete
jacques at tiete.org
GSM: 32(0)499 99 83 78

time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: prs10_connector.jpg
Type: application/octet-stream
Size: 99254 bytes
Desc: not available
URL: <http://febo.com/pipermail/time-nuts_lists.febo.com/attachments/20171009/ead9db4d/attachment.obj>

More information about the Time-nuts_lists.febo.com mailing list