[time-nuts] Fast Rise/Fall Time Pulser
paulswedb at gmail.com
Tue Oct 10 20:09:31 UTC 2017
I looked at the picture and I can see now that the sma is the pulse and the
BNC is the output trigger. Pretty interesting for the cost.
I then did a search on google for fast pulse generation and a analog
devices solution came up that delivers 50ps and actually shorter. I doubt
its one and the same method. But look forward to other comments.
On Tue, Oct 10, 2017 at 3:42 PM, Brooke Clarke <brooke at pacific.net> wrote:
> Hi Larry:
> How does it work.
> When I was working with microwave semis it was either a tunnel diode or a
> Step Recovery Diode.
> Have Fun,
> Brooke Clarke
> -------- Original Message --------
>> There has been discussion recently about generating fast rise/fall time
>> pulses by various means. Here is a link to a Leo Bodnar device that will
>> provide <40 ps rise/fall time, 50% duty cycle, 10 MHz pulses:
>> This is built on a small PWB with integral BNC connector, powered by 5
>> vdc through a USB B connector; a trigger output is provided. Price is US$68.
>> I've ordered one of these for testing.
>> Is anyone here using one of these?
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/m
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com