[time-nuts] Short term 10MHz source

[Tom Van Baak]

> If you are working on the firmware, consider adding a time-nuts mode that also 
> includes the post-calibration data.

Hal,

When you power up the TICC, go into D (debug) mode.
Then instead of just outputting timestamps, it will output:
# time1 time2 clock1 cal1 cal2 PICstop tof timestamp

For more info, read the Arduino code: https://github.com/TAPR/TICC/tree/master/TICC
And also TI's TDS7200 datasheet: http://www.ti.com/product/TDC7200

/tvb