[time-nuts] R390 Non A Upgrade Info Wanted

[Bob kb8tq]

Hi

I *assume* this one should have gone to the R-390 list. Probably should re-post it there and we can
take it up over there.

Bob

> On May 26, 2019, at 2:26 AM, Perry Sandeen via time-nuts <time-nuts at lists.febo.com> wrote:
> 
> Yo Bubba Dudes!,
> Uh being of unsound mind since I'm planning on moving 2,200 miles in the coming future......
> Honest honey, this R 390 was just sitting there on ebay at such a low price, it uh just sorta, somehow err, followed me home.
> So now that I have my 2nd one (and the first one is still untouched after 5 years)
> ---Yes, please doctor adjust my meds---
> Oh yes, where was I?  Ms. Pelosi? 
> 
> Ah yes! Now I remember.
> I am in the process of digitizing the OEM R 390  2 part ski from Andy Morrer's site.  This will be a long time coming.  What I wanted to do is incorporate in the ski's is information of parts that are problematic.  Under-wattage resistors, leaky caps, parts to add or improve or any information of that nature. Or tips or tricks that I can add as annotations.  I will add an attribution list for those who contribute even if they are SK.  When done I'll make the BIT TIFF image available on several sites or from me.
> For those who might not be familiar with the BIT type of image it is only black or white no matter what print size is chosen - no smearing.  So one can go to Kinko's and for $10 get a 24" X 48" print to put on the wall if needed.
> 
> So please send me any information you have whenever using an original email and I'll add it to a word file and eventually incorporate it into the final schematics
> 
> Regards,
> Perrier
> 
> 
> 
>   
> 
> 
> 
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.