[time-nuts] Re: Question about TSC5110
Jim Schatzman
james.schatzman at futurelabusa.com
Sat Jun 15 23:06:20 UTC 2024
Thanks for the suggestions!
The RTC is an STMicroelectronics M48T86PC1 which is obsolete. They are available from various sources, but not Digikey and Mouser. I have ordered some. I just have never seem them before, so I wasn't looking for a large DIP package to contain a battery. Live and learn. I am interested to see if the batteries are good in the available "new" parts, since they are no longer made.
At 04:21 PM 6/15/2024, Wilko Bulte wrote:
>Have you tried swapping the coprocessor cards back? It could be as simple as re-seating the cards, which in essence is what happened during the swap. I think a swap-back is worth trying.
>
>As for the battery question: is there per chance a "fat"/ high DIL chip in there marked Dallas or ST (SGS/Thompson) ? Those ICs have Li batteries in their 'backpack'. Replacing a depleted battery requires swapping the entire chip. I think they are speced for 10 years or so but generally last longer (at least in equipment I saw them in).
>
>Wilko
>
>> On 15 Jun 2024, at 23:55, AC0XU (Jim) via time-nuts <time-nuts at lists.febo.com> wrote:
>>
>> I have several TSC5110s. One stopped working after a period of high temps in the lab. It wouldn't complete the boot process - just displayed the spash screen, flashed off, then splash screen again. Power cycling gave the same result. Replacing the compact flash card didn't help.
>>
>> Swapping cards between two units one at a time, there were no changes in behavior until I swapped the co-processor card. Then both units started working!
>>
>> I am not sure what that is about. But I notice another thing - I can't change the date/time on either unit. I suspect the CMOS battery, but I can't find it. The CPU boards don't have the standard CR2032 or anything I recognize as a battery. When I try to set the date/time, the units freeze up and have to be power-cycled.
>>
>> Anyone know how to locate the battery on these CPU boards?
>>
>> Also, any thoughts on why swapping the co-processor cards made both units start working?
>>
>> Thanks!
>>
>> Jim
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe send an email to time-nuts-leave at lists.febo.com
More information about the Time-nuts_lists.febo.com
mailing list