[time-nuts] Re: Oscilloquartz OSA 5420 - Manuals and Software Needed

[Herman Karst]

Yes it is a OSA 5430 Razvan, I have sent you a dropbox link.

They have 3 10 MHz Oscillators versions HQ + = OCXO the HQ ++ Double oven OCXO and the Rubidium version. I have the HQ ++.

Wordt of warning, never update the firmware if you get it somewhere. If there are parameters in the firmware suboptimal for your unit you get serious frequency errors.

Succes


Op 18 nov 2024, om 20:02 heeft Razvan Popescu <yo8ryr at gmx.net> het volgende geschreven:

Hello Herman,

Thank you very much. I really appreciate it.
About your unit, you mean OSA 5430? I cannot find any Oscilloquartz OSA
5530 except for an OSA 5530B which is a totally different device.

Best regards,
Razvan

On 18/11/2024 09:19, Herman Karst via time-nuts wrote:
> Hi Razvan,
> 
> I have the OSA 5530 that is very similar. I have found the documents for that unit and I don’t think the software is very different.  I put it on a file sharing system tonight.
> 
> Met vriendelijke groet | With kindest regards | Cordialement | Med vennlig hilsen | Mit freundlichen Grüßen,
> 
> Richard Karst
> PA1FYB
> 9761 EV Eelde Netherlands
> 
> 
> 
> 
>> Op 17 nov 2024 om 08:35 heeft Razvan Popescu via time-nuts <time-nuts at lists.febo.com> het volgende geschreven:
>> 
>> Hello,
>> 
>> I bought the unit in the subject from a bankrupt company and I want to
>> share some things about this one and ask for some help if anyone has
>> access to ADVA/Oscilloquartz Support page.
>> 
>> This unit is a compact 1U rack mountable type and it is completely
>> silent, I didn't hear any fan noise. On the back it has some radiator
>> which is barely warm.
>> 
>> First issue I had was the RS232 serial port (RJ45) which was not using
>> the "standard" pinout I was used to so I had to build my own cable.
>> 
>> I attached the pinout to this email in case someone needs it.
>> 
>> I went through the initial configuration and everything seems OK.
>> 
>> In terms of hardware it has the following:
>> - CPU Freescale LayerScape LS1020E ARMV7 at 1000 MHz
>> - RAM 512 MB DDR3
>> - Flash 4 MB
>> - NAND 1024 MB
>> 
>> It is running some embedded Linux and my software version is 10.5.2
>> 
>> Issues that I found with Oscilloquartz are the following:
>> - they only provide a datasheet
>> - NO manuals
>> - NO software/firmware
>> - NO possibility to create a support account and request manuals and
>> software. (Only the Sales person can create one for you)
>> 
>> I found one seller on eBay that sold 29 pieces of the same model and he
>> said in the ad he has the following manuals and software but I cannot
>> contact him since the auction ended and I am not sure if he is willing
>> to help since I didn't buy this unit from him. If anyone on the list
>> bought this unit from him and ot the manuals and firmware I would like
>> also to have them please.
>> 
>> https://www.ebay.com/itm/186154228890
>> 
>> Manuals:
>> OSA 542x 10.5.1 Provisioning and Operations.PDF
>> OSA 5405 SyncReach User Manual 10.1.1.PDF
>> OSA 542x R10.2.1 System Description.PDF
>> OSA 542x R10.5.1 System Description.PDF
>> OSA 542x 10.5.1  Installation and Commissioning Manual.PDF
>> OSA542x10.5.1CLIReferenceGuide.PDF
>> OSA542x10.5.1SNMPUserGuide.PDF
>> 
>> Firmware:
>> OSA-542x.11.1.2-072.img
>> 
>> Does anyone have any manuals and firmware for this unit?
>> 
>> Thanks!
>> Razvan
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe send an email to time-nuts-leave at lists.febo.com
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com