[time-nuts] Symmetricom S250 Freeze-Up

[Adam Zeloof]

Hi all,

I picked up a Symmetricom S250 NTP server last weekend, and I'm having some
trouble with it. When powered, it'll run for a couple of hours before
freezing up. The LEDs on the front all turn red, the screen stops, and the
web interface is unreachable. I've tried factory resetting, upgrading from
the originally-installed 1.26 Firmware to 1.36, and installing a new CF
card. If I reboot after a freeze, it usually freezes again within a few
minutes unless it's sat for a while. Any ideas or solutions would be
appreciated!

Thank you,
Adam