[time-nuts] 5065A Oscillator replacement

[Ulf Kylenfall]

FWIW:
Regarding the 10811 "adapter" module used in 5065A...
I have a design for the 10811-oscillator back PCB that includesa 10 MHz "Sniffer" SMB connector. The board is a drop-inreplacement. The SMB connector is to be soldered ontothe back/secondary side of the PCB and a hole has to be drilledin the metal frame. That facilitates a connecton to be routed outsafely.
I use this borad in my own 5065A.
Can upload the design if there is an interest in it.
Regards
Ulf KylenfallSM6GXV