[time-nuts] Re: 5065A Oscillator replacement

[Larry McDavid]

I have a 5065A and I'd like to get 10 MHz output directly. My 5065A has 
a 10811 10 MHz oscillator.

Are any of these boards available now?

Best wishes,

Larry McDavid W6FUB
Anaheim, California (SE of Los Angeles, near Disneyland)

On 7/10/2026 2:08 AM, Ulf Kylenfall via time-nuts wrote:
> 
> FWIW:
> Regarding the 10811 "adapter" module used in 5065A...
> I have a design for the 10811-oscillator back PCB that includesa 10 MHz "Sniffer" SMB connector. The board is a drop-inreplacement. The SMB connector is to be soldered ontothe back/secondary side of the PCB and a hole has to be drilledin the metal frame. That facilitates a connecton to be routed outsafely.
> I use this borad in my own 5065A.
> Can upload the design if there is an interest in it.
> Regards
> Ulf KylenfallSM6GXV
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com
>