[time-nuts] Re: Wanted: 5065A Parts

[Robert Marinelli]

Regarding vent holes, maybe find a friend with CNC (even a CNC for wood will work) make drawing (easy & fun), CNC drills hundreds of perfect holes,  I've done this for several custom enclosures it is fun to watch it run. I'm not in Europe, sorry.

-Robert

On Thu, Jul 30, 2026, at 10:05 AM, Stijn via time-nuts wrote:
> Hi all,
> 
> I like to thank everyone for the answers, but unfortunately no parts.
> Green lens is not a deal breaker, I have 3 orange lenses, so no open 
> lamps. Just for the aesthetics.
> 
> The multi-turn knob I have found at Mouser, is still a running part. 
> Mouser: 858-2606S
> 
> Still looking for a top cover, I do have a top cover, but don't know 
> from what instrument. It has no vent holes and I don't like that since 
> the 5065A is running quite warm.
> Most covers are not deep enough.
> 
> I think that based on the part number 5061-2041, the top cover from a 
> 5061A will fit. Unfortunately, even for 5061A's that are absolutely dead 
> and depleted they are asking crazy money.
> But because most of these are depleted and several are parted out, I 
> hope that someone still has a top cover.
> 
> Preferably in Europe.
> 
> Kind regards,
> 
> 
> Stijn Nestra
> 
> 
> 
> Op 30-6-2026 om 17:58 schreef Stijn Nestra via time-nuts:
> > Hi all,
> >
> > I am looking for some 5065A parts:
> >
> > An original top cover.
> > Green lens for the Continuous operation lamp.
> > Multi-turn head for the Fine adjustment pot.
> >
> > Preferably in Europe.
> >
> > Kind regards,
> >
> >
> > Stijn Nestra
> > _______________________________________________
> > time-nuts mailing list --time-nuts at lists.febo.com
> > To unsubscribe send an email totime-nuts-leave at lists.febo.com
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com
>