[time-nuts] Oncore Carrier phase software

[Brian Kirby]

I have a copy of GrafNav/GrafNet.  If you need to process some data, let 
me know.

Please do not send email asking for a copy of the software program - it 
was very expensive and it only works with a dongle !

Brian Kirby

Randy Warner wrote:
> ); SAEximRunCond expanded to false
> Errors-To: time-nuts-bounces+kirbybq¾llsouth.net+kirbybq¾llsouth.net at febo.com
> X-Spam: [F=0790697674; S=0.010(2007071801); MH=0.850(2007071834); R=0.600(s0/n0)]
> X-MAIL-FROM: <time-nuts-bounces+kirbybq¾llsouth.net at febo.com>
> X-SOURCE-IP: [(unknown)]
> X-MxL-Spam-Verdict: No
> 
> Bjorn,
> 
> When I was working with Motorola receivers the standard software was GrafNav
> from Waypoint consulting. They were purchased by Novatel a couple of years
> ago so I don't know the status of these old products.
> 
> http://www.novatel.com/products/waypoint_grafnav.htm
> 
> 
> Best regards,
>  
> Randy Warner
> Senior Applications Engineer
> Geodetics, Inc.
> 858.729.0872
> 
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Björn Gabrielsson
> Sent: Wednesday, July 18, 2007 2:24 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] Oncore VP problem
> 
> ); SAEximRunCond expanded to false
> Errors-To: time-nuts-bounces+randy
> Jason,
> 
> This translator should get you into rinex.
> 
>   http://www.helenav.nl/rinex.htm
> 
> When there you have all post processing packages out there to work between
> base VP and rover VP, VP vs your local CORS, VP vs your other GPS, etc.
> 
> If you find something more generic than DOS excecutable - let me know!
> 
> --
>    Björn
> 
> On Wed, July 18, 2007 23:01, Jason Rabel said:
>> Bjorn,
>>
>> Is there any software available (free / trial / pay) that makes use of the
>> carrier phase data from the VP? If so, could you shoot me some URLs!
>>
>> Jason
>>
>>
>>> In some ways the VP which has optional phase outputs IS a higher-end
>>> receiver than the newer oncore receivers lacking that option. ;-)
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>