[time-nuts] Fury Interface Board: How about TI OPA277?
brooke at pacific.net
Sat Nov 3 23:50:11 EDT 2007
The SC 10 can be configured with it's EFC voltage range the same as about any
possible oscillator. The PCB just has optional parts to allow that.
----------- from the above web page--------
Mech. tuning range >±3 Hz
EFC range and slope
Option 1 0 to 10 V, 5 V nominal, +0.5 Hz/V
Option 2 0 to 10 V, 5 V nominal, -0.5 Hz/V
Option 3 -10 to 10 V, 0 V nominal, +0.25 Hz/V
Option 4 -10 to 10 V, 0 V nominal, -0.25 Hz/V
Option 5 -5 to 5 V, 0 V nominal, +0.5 Hz/V
Option 6 -5 to 5 V, 0 V nominal, -0.5 Hz/V
Option 7 0 to 6 V, 3 V nominal, +0.75 Hz/V
Option 8 0 to 6 V, 3 V nominal, -0.75 Hz/V
http://www.prc68.com/I/WebCam2.shtml 24/7 Sky-Weather-Astronomy Cam
Bruce Griffiths wrote:
> ); SAEximRunCond expanded to false
> Errors-To: time-nuts-bounces+brooke=pacific.net at febo.com RETRY
> kevin-usenet at horizon.com wrote:
>>Yeah, it gets a bit heated. Since you have the data sheets and all,
>>could you spare us a bit of work and summarize, for each OCXO:
>>- What EFC and power voltages it needs.
>> (Using an input voltage lower than your own supply rail seems odd.)
>>- What EFC voltage stability (uV per day or whatever) is needed to match
>> the oscillator stability (ppb per day).
>>- And what RFC voltage tempco (uV/C) is required to match the oscillator
>> tempco (ppb/C).
> I have datasheets (or equivalent thereof) for
> HP 10543
> HP E1938A
> OSA 8600
> OSA 8607
> SRS SC 10
> Symmetricom 1000B
> I will setup a spreadsheet for these that tabulates EFC voltage limits
> etc and calculates the required drifts etc.
> I can export the results as a pdf file or in some other format if required.
> I use Open Office to allow cross platform compatibility.
> Spreadsheet can also be saved in Excel format if required.
> I have FreeBSD, Linux and Windows XP/2K/98SE machines available.
> If anyone has data for additional OCXOs they wish to include please post
> a link or send me (off list) the datasheet as an attachment.
> I will periodically post the updated OCXO list
> I should be able to post a preliminary table by 1300 UTC.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts