[time-nuts] Multiplying 10 MHz to 100 MHz
dave powis
g4hup at btinternet.com
Fri Jan 8 21:53:02 UTC 2010
Hi Bruce,
The filter you are referring to is the Neosid 120MHz filter - it is available from Eisch Electronik, http://www.eisch-electronic.com/
part no 511836. It is specified as 120 to 160MHz, so not sure it will go down to 100MHz. If you wish make an enquiry with Eisch, the proprietor, Uli, does speak English.
Hope this helps,
73
Dave, G4HUP
http://g4hup.com
________________________________
From: "brucekareen at aol.com" <brucekareen at aol.com>
To: time-nuts at febo.com
Sent: Friday, 8 January, 2010 20:18:32
Subject: [time-nuts] Multiplying 10 MHz to 100 MHz
In an earlier post I mentioned that I had been searching on-line for ideas
to multiply a 10 MHz signal to 100 MHz. I would like to multiply the 10
MHz outputs of an LPRO and a Thunderbolt GPS to feed to 10 GHz phase-locked
microwave sources so their outputs can be fed to a mixer for enhanced
frequency comparison.
F4GBC kindly provided the following link for an article in French.
HI all,
have a lok to :
http://pagesperso-orange.fr/f5cau/ol_shf/OL9HX.pdf
very interesting for those who read french.
Alain
F4GBC
After looking at the article I searched on-line for the part number of the
specified 100 MHz filter and found a link to an English language version of
the article _http://g4hup.com/DFS/F9HX%20synthe%20english.pdf_
(http://g4hup.com/DFS/F9HX%20synthe%20english.pdf) , should anyone be interested.
Bruce Hunter, KG6OJI
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list