[time-nuts] Parts (Mouser) for the PICTIC II

[Bob Bownes]

 I'll get these 2 corrections in tonight. I was wondering if the 3/8"
parts would fit.

On Thu, Jul 8, 2010 at 8:07 PM, Bob Camp <lists at rtty.us> wrote:
> Hi
>
> Another thing I think we need to get on the project is Q4:
>
> 512-2N7000TA    Farichild's version at 0.13 each.
>
> Since I didn't create the project I don't seem to be able to edit it ....
>
> Bob
>
>
> On Jul 8, 2010, at 7:26 PM, Richard H McCorkle wrote:
>
>> Bob,
>> Instead of the 3266 series go to the 3296 series
>>
>> 5K Trimmer, top adjust
>> 652-3296W-1-502LF 7100 in stock
>> 652-3296Y-1-502LF  590 in stock
>>
>> 200 Trimmer, top adjust
>> 652-3296W-1-201LF 1090 in stock
>> 652-3296Y-1-201LF 830 in stock
>>
>> Richard
>>
>>
>>> Hi
>>>
>>> The real question somebody needs to answer is - will it work with side adjust
>>> trimmers? If not, then we're going to have to find another source to get the
>>> trimmers from.
>>>
>>> The project on Mouser shows the 3266p trimmer. AFIK the correct part is the 3266w.
>>> The board also appears to be laid out for the 3266y. Another alternative is the
>>> 3266x. All the details of what's what are at:
>>>
>>> http://www.bourns.com/data/global/pdfs/3266.pdf
>>>
>>> My guess is that the 3266p isn't going to work. The 3266y is even harder to get
>>> than the 3266w. The 3266x looks problematic when you go to do the adjustment
>>>
>>> Rational solutions:
>>>
>>> 1) Jameco shows the 3266w as "ships today" in 5 K ohms. Who knows how many they
>>> actually have....
>>> 2) 3266w is available in the 2K ohm flavor at Mouser (lots in stock). If you change
>>> R16 and R23 to 1K ohms, the 2K pot should work fine.  That makes them the same
>>> value as R5 and R6. One fewer line item ...
>>>
>>> I'd vote for option 2.
>>>
>>> Bob
>>>
>>>
>>>
>>>
>>> On Jul 8, 2010, at 2:55 PM, Lester Veenstra wrote:
>>>
>>>> Safe to get in the water yet?
>>>>
>>>>
>>>>
>>>> Lester B Veenstra  MØYCM K1YCM
>>>> lester at veenstras.com
>>>> m0ycm at veenstras.com
>>>> k1ycm at veenstras.com
>>>>
>>>>
>>>> US Postal Address:
>>>> PSC 45 Box 781
>>>> APO AE 09468 USA
>>>>
>>>> UK Postal Address:
>>>> Dawn Cottage
>>>> Norwood, Harrogate
>>>> HG3 1SD, UK
>>>>
>>>> Telephones:
>>>> Office:     +44-(0)1423-846-385
>>>> Home:     +44-(0)1943-880-963
>>>> Guam Cell: +1-671-788-5654
>>>> UK Cell:   +44-(0)7716-298-224
>>>> US Cell:   +1-240-425-7335
>>>> Jamaica:  +1-876-352-7504
>>>>
>>>> This e-mail and any documents attached hereto contain confidential or
>>>> privileged information. The information is intended to be for use only by
>>>> the individual or entity to whom they are addressed. If you are not the
>>>> intended recipient or the person responsible for delivering the e-mail to
>>>> the intended recipient, be aware that any disclosure, copying, distribution
>>>> or use of the contents of this e-mail or any documents attached hereto is
>>>> prohibited.
>>>>
>>>>
>>>> _______________________________________________
>>>> time-nuts mailing list -- time-nuts at febo.com
>>>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>>> and follow the instructions there.
>>>>
>>>
>>>
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>>>
>>
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>