[time-nuts] 5061A AC Power connector

J. L. Trantham jltran at att.net
Sun Nov 25 03:48:07 UTC 2012


Forgot to mention, when you get the DMS3106A18-22S, you'll have to unscrew
the back, remove the connector insert, file out a small 'key' in the
material, and rotate the insert to achieve the desired alignment to mate
with the connector on the 5061A or the 5065A.  The alignment is the same on
both but the wiring might be different.

Joe

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of J. L. Trantham
Sent: Saturday, November 24, 2012 8:36 PM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] 5061A AC Power connector


Pete,

In the US, Galco sells a DDK product that works well.  The connector and
shell are a DMS3106A18-22S.

http://www.galco.com/buy/DDK/DMS3106A18-22S

You will also need a clamp and strain relief.  I use a DMS3057-10A.

http://www.galco.com/buy/DDK/DMS3057-10A

It is the same connector as a 5065A though you have to be careful about the
wiring.  Some of the 5065A's are the same as the 5061A and others are
different.

Hope this helps.

Joe

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Pete Lancashire
Sent: Saturday, November 24, 2012 6:51 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] 5061A AC Power connector

What is the MS type for the power plug for a 5061A ?

I could not find it in the PDF I have.

-pete

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.




More information about the time-nuts mailing list