[time-nuts] 5061A AC Power connector

[J. L. Trantham]

Unfortunately, my junk box is not so well stocked with MS connectors.  The
DDK units are much cheaper than the Cannon connectors.

Joe

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Pete Lancashire
Sent: Saturday, November 24, 2012 9:45 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] 5061A AC Power connector


I've had a few emails on what I meant by just needing the 18-22S. The series
of connectors this on is from came out in WW2 to attempt to standardize on
connectors. One feature is the outer shell and the inner insulated center
are interchangeable.

This glossy gives a pretty good overview and how its done

http://www.ittcannon.com/uploadedFiles/Product_PDFs/MS%20A&B%20Catalog.pdf

-pete

On Sat, Nov 24, 2012 at 7:40 PM, Pete Lancashire <pete at petelancashire.com>
wrote:
> 18-22S is what I needed, now to go into the depths of the garaged and 
> find the box of MS connectors.
>
> -pete
>
> On Sat, Nov 24, 2012 at 6:35 PM, J. L. Trantham <jltran at att.net> 
> wrote:
>> Pete,
>>
>> In the US, Galco sells a DDK product that works well.  The connector 
>> and shell are a DMS3106A18-22S.
>>
>> http://www.galco.com/buy/DDK/DMS3106A18-22S
>>
>> You will also need a clamp and strain relief.  I use a DMS3057-10A.
>>
>> http://www.galco.com/buy/DDK/DMS3057-10A
>>
>> It is the same connector as a 5065A though you have to be careful 
>> about the wiring.  Some of the 5065A's are the same as the 5061A and 
>> others are different.
>>
>> Hope this helps.
>>
>> Joe
>>
>> -----Original Message-----
>> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] 
>> On Behalf Of Pete Lancashire
>> Sent: Saturday, November 24, 2012 6:51 PM
>> To: Discussion of precise time and frequency measurement
>> Subject: [time-nuts] 5061A AC Power connector
>>
>> What is the MS type for the power plug for a 5061A ?
>>
>> I could not find it in the PDF I have.
>>
>> -pete
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to 
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to 
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.