[time-nuts] Loran again

paul swed paulswedb at gmail.com
Fri Feb 1 11:28:12 EST 2013


Yes indeed I can see the local RB and GPS along with the eLORAN all
starting to track and the local offsets are steadily decreasing. Great to
see. SURE as heck beats the ole WWVB.
Will guess long about 5pm local eLORAN will drop for the weekend. It needs
a beer.
Paul

On Fri, Feb 1, 2013 at 11:09 AM, paul swed <paulswedb at gmail.com> wrote:

> Hello to the group. There is no need for slaves. Quite a while ago there
> was a slave but it was simply the master faking out a slaves position by
> delay. That said yes indeed the systems settling in well to the RB ref and
> I will switch over to the 3801 sometime this afternoon.
> Fired up the Austron 2100s
> Regards
> Paul
> WB8TSL
>
>
> On Fri, Feb 1, 2013 at 8:54 AM, Stan, W1LE <stanw1le at verizon.net> wrote:
>
>> Still locked onto the Dana/Seneca Loran stations at 8:38 am local.
>> Comparison to GPS/DO is about the same. No new slaves detected.
>>
>> Stan, W1LE    Cape Cod
>>
>>
>>
>> On 2/1/2013 12:30 AM, Stan, W1LE wrote:
>>
>>> Fired up the SRS FS700 and auto found the GRI 89700 microsecond stations
>>> in Dana Il (master)
>>> and Seneca NY, (slave) both with equal signal strength of 63 db. Other
>>> slaves were not to be found.
>>> Noise margin of 32 dB and Rx gain of 72dB. So the Rx is all locked up.
>>> Tomorrow I will have more data comparing the 10 MHz from the T'Bolt.
>>> Right now they are comparing to within 10EE10.
>>>
>>> Stan, W1LE   Cape Cod
>>>
>>>
>>>
>>> On 1/31/2013 10:44 PM, Stan, W1LE wrote:
>>>
>>>> What GRI should we be listening for ?
>>>>
>>>> Stan, W1LE    Cape Cod   FN41sr
>>>>
>>>>
>>>>
>>>> On 1/31/2013 9:56 PM, paul swed wrote:
>>>>
>>>>> Rich indeed its on the air. Warming up the FS700 to see if it will
>>>>> lock.
>>>>> Have a pattern ram thats getting flakey and takes about 30 minutes to
>>>>> warm
>>>>> up along with the oven.
>>>>>
>>>>>
>>>>>
>>>> ______________________________**_________________
>>>> time-nuts mailing list -- time-nuts at febo.com
>>>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>>>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>>>> and follow the instructions there.
>>>>
>>>>
>>> ______________________________**_________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>>> and follow the instructions there.
>>>
>>>
>> ______________________________**_________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>> and follow the instructions there.
>>
>
>


More information about the time-nuts mailing list