[time-nuts] Looking for info on Austron 1100-1 OXCO

[Roger Tilsley]

Greetings Dave,

While I do not know the Austron 1100 oscillators, I have experience of Austron 1120 oscillators.  I suspect the 1100 and 1120 are very similar.  I am sending a data sheet for the 1120 and an operating spec for the 1120 L.  Note that the 1120Ls does not have varicap fine frequency trimming.  Austron were consistent with the pin-out for IO plug-in oscillators.  The 1120s have soldered base to can joints and I have successfully take them apart for repair (extra capacitance!).  The 1120s are very good.

Regards,
Roger T.


On Fri, 30 Jun 2017 12:14:14 -0500, "Dave M" <dgminala at mediacombb.net> wrote:

> Does anyone have any data on the Austron 1100-1 5MHz OXCO?  Pinout & specs 
> would be great.
> 
> Thanks!
> Dave M 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.


-------------- next part --------------
A non-text attachment was scrubbed...
Name: Austron_1120.pdf
Type: application/pdf
Size: 2204657 bytes
Desc: not available
URL: <http://www.febo.com/pipermail/time-nuts/attachments/20170702/3c9ae9ed/attachment-0001.pdf>