[time-nuts] HP-5065a bought and finally working!

Azelio Boriani azelio.boriani at screen.it
Wed Aug 22 09:43:14 UTC 2012


I think that it is the time for you to look at the TimePod: the TimePod can
help you with Allan Deviation and phase noise measurement, the next step
after clocks is measuring equipment and the TimePod is a sort of all-in-one
for time-nuts, its place is right after the bench yellow multimeter.

On Wed, Aug 22, 2012 at 9:03 AM, Chuck Forsberg WA7KGX N2469R
<caf at omen.com>wrote:

> If it is a really good Rb standard, consider adjusting the
> standard yourself by measuring the phase over several
> days once the standard has warmed up and settled down.
> A GPIB counter with phase measurement is useful for this.
>
> --
> Chuck Forsberg WA7KGX N2469R     caf at omen.com   www.omen.com
> Developer of Industrial ZMODEM(Tm) for Embedded Applications
>   Omen Technology Inc      "The High Reliability Software"
> 10255 NW Old Cornelius Pass Portland OR 97231   503-614-0430
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>



More information about the Time-nuts_lists.febo.com mailing list