[time-nuts] Rb vs.Crystal OCXO

Bill Dailey docdailey at gmail.com
Sun Apr 27 17:04:25 UTC 2014

I unplug the antenna from my fury boards.  I hope this is an effective alternative.

Sent from mobile

On Apr 27, 2014, at 9:02 AM, "Tom Van Baak" <tvb at LeapSecond.com> wrote:

>> The Pendulum GPS-88 and GPS-89 have a button on the front you push when 
>> you want to force it into hold-over to do your measurement, for this 
>> very reason.
>> PPS steering and OCXO steering is the same thing once you forced the PPS 
>> into the right range. Some *really* depend on the synchronicity between 
>> 10 MHz and PPS, and you should not obscure it if possible.
>> Cheers,
>> Magnus
> When doing a sensitive measurement where stability is more important than accuracy I turn off GPS disciplining.
> The TBolt has commands to go into and out of holdover. But more effective are the 0x8E,0xA3,4 and 0x8E,0xA3,5 commands which simply disable and enable disciplining.
> /tvb
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the Time-nuts_lists.febo.com mailing list